We produce cisterns (tanks) of reinforced polyester, and their purpose is storage and transportation of liquids for food or for chemical industry. They are used for storage of water, milk, alcohols, oils and other liquids. Made of reinforced polyester, resistant to many organic and inorganic materials, acids, alkalis, can storage materials in temperatures ranging from -40°C to 120°C. Pressure storage is also possible. In cases where constant temperature of material is needed, cisterns can be manufactured with polyurethane thermal-insulation. For all the built in materials we possess national and international certificates.

Regarding that the inner surface of the cistern is very smooth, it does not allow any amass of materials. Thereby, the maintenance of the tanks and storage of liquids is quite simple. The tanks can be above ground, underground, and transportation ones.

Above ground cisterns can be horizontal or vertical tanks, with stands or with flat bottom. Standard production includes tanks 1-100 m3 in volume and diameters 1000 mm to 3000 mm, and tanks in different dimensions can be produced on demand.

Buried (underground) cisterns are used for storage of gasoline, diesel fuel, jet engine fuel or drinking water in underground temperature conditions. As a material, polyester is not corrosive, so the cisterns are free of wandering currents and galvanizing processes. This material does not lose its properties with time, and there is no possibility of interference of material contained in tanks with the materials from the soil. Therefore, no maintenance or occasional testing is needed. If installed properly, underground tanks can withstand even the traffic of the heaviest vehicles. Compared to the iron tanks, underground polyester tanks provide important savings by its long service life. Cisterns are equipped with the necessary valves.

Transportation cisterns can be attached to the chassis or the hull of transport vehicle. In standard production includes cisterns 1,5 to 20 m3 in volume. They are equipped with the openings for filling, emptying and cleaning, climbing pads, platform, container for pouring equipment, and the appropriate pump for filling and emptying on demand. Breakwaters are built into cisterns to increase transportation safety. Thermo-insulation can be built in, if needed.